Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Temple City, CA
Chimney repair in Temple City usually means dealing with a masonry chimney built between 1940 and 1965 that has quietly deteriorated for decades. Cracked mortar crowns, spalled clay flue tiles, and rusted-out caps are the dominant problems here, not heavy creosote. The mild San Gabriel Valley climate means fireplaces get used lightly, so structural decay outpaces soot buildup. Glendale Chimney Sweep has served Temple City since 2011, and we see the same pattern on street after street: original brick chimneys that need repair, not just a sweep. Call (833) 467-6493 when you want a straight answer about what your chimney actually needs.
Why Temple City Homes Are Different
Temple City’s housing stock is overwhelmingly single-story California ranches and bungalows from the 1940s through the 1960s. These homes sit on compact lots in the flat San Gabriel Valley grid, and the original fireplaces were built for ambiance more than serious heating. What that means for chimney work: the masonry is now 60 to 80 years old, the clay flue tiles are often cracked or separated, and the mortar crowns have been baking in the Southern California sun for decades. We rarely find heavy creosote in Temple City. What we do find is structural wear from time and weather, plus debris that built up during years the fireplace sat unused.
The distinctive twist in Temple City is the renovation pattern. Many of these postwar homes have been expanded or remodeled over the years, and the chimney often got left behind. A family room addition changes the roofline and leaves the chimney offset awkwardly. A firebox rebuild from the 1980s doesn’t always match the original flue dimensions. Patio covers and trellises, common in Temple City backyards, frequently make roof access tight. Dry Santa Ana winds add another layer: spark arrestors and caps fail faster here than in coastal areas, and the foothill wildfire risk means a damaged spark arrestor isn’t something to ignore.
Styles & brands we work with
Our Main Temple City Services
Most Temple City homeowners call us for one of two reasons: a fireplace that hasn’t been inspected in years, or a dryer that’s suddenly taking forever to dry clothes. Both are vented-combustion systems, and both need the same kind of disciplined attention.
Chimney Sweep in Temple City
A chimney sweep in Temple City is less about heavy creosote removal and more about clearing what the dry climate and local bird population leave behind. Palm frond debris, leaf litter, and nests are common in flues that haven’t been opened in years. We sweep the full flue, inspect every accessible component, and photo-document what we find. If your Temple City chimney hasn’t been looked at in five or more years, this is the place to start. Chimney Sweep in Temple City covers the full scope, pricing, and what to expect on the day.
Dryer Vent Cleaning in Temple City
Dryer vents in Temple City’s older ranches are often routed through tight wall cavities or under slab foundations, which means lint accumulates faster than in a newer home with a short, straight vent run. The dry air doesn’t help: lint here bakes into a fine, highly flammable layer that restricts airflow. We clean the full vent run from dryer to exterior termination and can advise on whether your 1960s vent routing is worth addressing. Dryer Vent Cleaning in Temple City has the detailed breakdown of how we do it and what it costs.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Temple City
Most Temple City chimney repair calls start the same way: someone spots a crumbling crown, hears a leak in the flue, or gets flagged during a pre-sale home inspection. The homes here are old enough that clay flue tiles have gone through thousands of thermal cycles, and many have cracked or spalled. The dry climate means water damage is less aggressive than in coastal areas, but Santa Ana winds and seasonal rain still work through every crack and mortar gap. When we quote repair work in Temple City, we show you the camera footage first. Chimney Repair is our most involved service line, and the sub-jobs below are what we handle most often in the 91780 ZIP code.
Chimney Cap Installation
Signs you need it
Your chimney has never had a cap, the existing cap is rusted through or missing, or birds and debris are getting into the flue.
What it costs in Temple City
In Temple City, chimney cap installation typically sits in the $250 to $500 range for a standard single-flue masonry chimney with normal roof access.
How we do it
We measure the flue tile, spec a cap that fits the existing crown without modification, mechanically fasten it to the flue, and verify the attachment can survive Santa Ana wind gusts.
Chimney Cap Replacement
Signs you need it
Your cap is rusted, dented, loose, or the mesh spark arrestor has pulled away from the cap frame.
What it costs in Temple City
A cap replacement in Temple City runs $300 to $550, with the higher end covering larger custom-fit caps for odd-sized or double flues common on 1950s brick chimneys.
How we do it
We remove the old cap, clean the flue crown surface, install a new cap sized to the existing flue tile, and make sure the spark arrestor mesh is intact and properly secured.
Chimney Crown Repair
Signs you need it
Your crown has visible cracks, missing chunks of mortar, or a dip that holds standing water after rain.
What it costs in Temple City
Crown repair in Temple City runs $350 to $700 depending on whether we’re patching and resurfacing or tearing out and recasting the entire crown.
How we do it
We assess the crown damage, cut out deteriorated mortar, and rebuild or resurface the crown so water sheds away from the flue tile instead of pooling around it.
What Chimney Repair Costs in Temple City
| Item | Typical range in Temple City |
|---|---|
| Chimney cap installation | $250 – $500 |
| Chimney cap replacement | $300 – $550 |
| Chimney crown repair | $350 – $700 |
Two things push chimney repair pricing up in Temple City. The first is roof access: patio covers, trellises, and low-clearance tile roofs make it harder to reach the chimney safely, and that setup time is part of the quote. The second is the mismatch between original flues and later remodeling. When a firebox was rebuilt or a roofline changed, the fix often requires custom fitting rather than an off-the-shelf part.
How do I know if my Temple City chimney needs repair or just a sweep?
A sweep clears the flue; repair fixes structural components. If you see crumbling mortar at the crown, water staining inside the firebox, or loose cap pieces, you need repair. We camera-inspect every chimney we work on, so you’ll see exactly what’s cracked and what’s fine before any work starts.
Does a cracked clay flue tile mean a full relining job?
Not necessarily. Small cracks can sometimes be addressed with HeatShield flue resurfacing rather than a full tear-out and relining. We inspect first and only recommend a full relining when the flue damage is extensive enough that resurfacing wouldn’t hold. Call (833) 467-6493 for a camera inspection and a straight answer.
Brands We Service in Temple City
We work with professional chimney-industry brands including HeatShield, Olympia Chimney, and Famco, and we stock repair components locally so Temple City jobs don’t wait on parts shipments. HeatShield flue resurfacing is one of our core capabilities for cracked clay liners, and our team is authorized to apply it. Our brands page lists what we use and why we name them on every quote.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Temple City, CA
| Service | Typical range in Temple City |
|---|---|
| Chimney cap installation | $250 – $500 |
| Chimney cap replacement | $300 – $550 |
| Chimney crown repair | $350 – $700 |
| Chimney sweep | $180 – $340 |
| Dryer vent cleaning | $100 – $250 |
| Level 2 chimney inspection | $250 – $450 |
| HeatShield flue resurfacing | $1,500 – $3,500 |
| Stainless steel flue liner installation | $1,800 – $4,000 |
| Chimney flashing repair | $300 – $800 |
| Firebox repair (mortar only) | $200 – $500 |
Prices climb in Temple City when a furnace flue shares the chimney with the fireplace, when roof access requires extra equipment, and when later remodeling created an offset that needs a custom liner rather than a standard rigid section. Every quote we give is a flat price agreed on before we start, not an estimate that can drift.
Neighborhoods We Serve in Temple City
We work throughout the 91780 ZIP code, from the older bungalow streets south of Las Tunas Drive to the ranch-home tracts north of Lower Azusa Road. Our crews know which blocks have the tightest roof access and which mid-century builds have the original clay flues.
- Central Temple City (Las Tunas corridor)
- North Temple City (Lower Azusa area)
- South Temple City (Rosemead Blvd corridor)
- East Temple City (Baldwin Ave side)
- West Temple City (near the San Gabriel border)
We typically schedule Temple City work within a few business days, and because we’re based nearby in Glendale, a return trip for parts or a second crew member is quick.
Service Area – Cities Near Temple City
We serve Temple City and the surrounding San Gabriel Valley cities. If you’re in North El Monte, CA, Rosemead, CA, San Gabriel, CA, or Arcadia, CA, we’ll bring the same camera-inspection-first approach and the same flat-price quoting.
Serving Temple City, CA — Our Local Coverage Area
We’re based in the Temple City area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Temple City
We schedule most Temple City work within a few business days. Roof-access complications like patio covers or trellises don’t slow the scheduling, but they do affect the quote, so we ask about your roof setup when you call (833) 467-6493.
Most repair work, including crown repair, cap installation, and flue resurfacing, doesn’t require a permit. Full firebox rebuilds or structural changes can trigger permit requirements, and we’ll tell you during the inspection if that applies to your job.
We cover the entire 91780 ZIP code and all surrounding San Gabriel Valley cities. There’s no travel fee for Temple City, and we schedule based on crew availability rather than neighborhood.
If your Temple City chimney hasn’t been inspected in years, or a home inspection flagged something, call (833) 467-6493. We’ll camera the flue, tell you exactly what needs fixing and what can wait, and quote a flat price before any work starts. No scare tactics, no vague “quality materials” talk. Just specific answers from a company that names the brands it uses.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Temple City Customers Say
"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
— Erin Doyle"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
— Rafael Guzman"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
— Carlos Morales