Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Encino, CA
Chimney repair in Encino starts with a camera inspection, because what’s actually wrong inside a 60-year-old clay-tile flue is rarely visible from the roof. Most of the calls we take from 91316 and 91436 are for cracked flue tiles, failed mortar joints, rusted dampers, and flashing that’s been leaking into ceilings during the few real rain events the Valley gets. Encino’s postwar ranch homes and hillside estates were built when wood-burning fireplaces were standard, and now those original masonry chimneys are reaching the age where repairs are structural, not cosmetic. If you’re seeing water stains near the fireplace or a sweep found damage, call Glendale Chimney Sweep at (833) 467-6493 and we’ll show you the footage before we recommend anything.
Why Encino Homes Are Different
The chimney work we do in Encino is shaped by two things: the age of the housing stock and how rarely those fireplaces actually get used. South of Ventura Boulevard in the 91436 hills, we regularly find fireplaces that haven’t been burned in a decade. That’s not neglect, it’s just how people live here; the fireplaces are architectural features, not primary heat. But unused flues collect creosote from the occasional fire, then squirrels or birds move in, and the first cold snap of the year turns a dormant chimney into a working fire hazard overnight.
The older homes in the flats, mostly 1950s and 60s ranch builds in 91316 and 91436, came with clay-tile liners that are now hitting the 60-to-70-year mark. Clay tiles crack from thermal stress, and once cracked, hot gases can reach framing. We see a lot of spalled liners in Encino, and we recommend HeatShield resurfacing more here than almost anywhere else in the Valley. The newer prefab fireplaces and gas inserts in rebuilt hillside homes need less repair, but they still need annual inspection because burners corrode and vents clog even when you barely use them. Encino’s semi-arid climate means most of the wear is from inactivity, not overuse. Critter nests, leaves, dust, and rusted dampers account for a large share of what we find.
Styles & brands we work with
Our Main Encino Services
Most Encino homeowners call us for one of two reasons: a chimney that’s overdue for cleaning and inspection, or a dryer vent that’s never been touched since the day the laundry room was built. Both are venting-safety issues, and both are jobs where we document everything with photos and video.
Chimney Sweep in Encino
A chimney sweep in Encino is as much an inspection as it is a cleaning. We remove creosote, soot, and whatever a squirrel left behind, then we run a camera up the flue to check the liner, damper, and crown. In Encino, we often find that a fireplace hasn’t been burned in years but a home inspector just flagged it during escrow, so the sweep doubles as the documentation the transaction needs before closing. Full details on what a sweep covers and what it costs are on our Chimney Sweep in Encino page.
Dryer Vent Cleaning in Encino
Dryer vent cleaning in Encino tends to uncover vents that run long, horizontal routes through attics or under slab, which is common in the older ranch layouts. Lint builds up at every turn, airflow drops, the dryer runs hotter, and the risk of a lint-fueled fire climbs. We clean the full vent run from the dryer to the exterior cap, clear blockages, and restore proper airflow. See the dedicated Dryer Vent Cleaning in Encino page for specifics and pricing.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Encino
Chimney repair in Encino usually means fixing a masonry chimney that’s been quietly failing for years. The 1950s and 60s ranch homes in the flats and the larger custom builds up in 91436 both have original fireplaces, and the older ones are now showing cracked flue tiles, deteriorated mortar, and flashing that lets water into the chase. We inspect first, show you the camera footage, and only then recommend repair; and when we recommend a Chimney Repair, we spec materials by name, because a liner or a crown is only as good as what it’s made from.
Chimney Cap Installation
Signs you need it
You hear birds or animals in the flue, or see water streaks on the fireplace wall after rain.
What it costs in Encino
Chimney cap installation in Encino typically runs from $225 to $650 depending on the cap size, material, and whether the flue needs a custom bracket.
How we do it
We measure the flue tile, mount a stainless or copper cap sized for proper draft, and seal the base so wind doesn’t whistle through.
Chimney Cap Replacement
Signs you need it
The existing cap is rusted through, missing mesh, or blown off the flue entirely.
What it costs in Encino
Replacing a chimney cap in Encino is a $275 to $550 job on most single-flue chimneys; larger or multi-flue caps run higher.
How we do it
We remove the old cap, check the flue tile for damage while we’re up there, and install a correctly sized replacement with new fasteners.
Chimney Liner Installation
Signs you need it
Your inspector found cracked flue tiles, or smoke and gases are leaking into walls instead of drafting up and out.
What it costs in Encino
Chimney liner installation in Encino ranges from $1,200 to $3,500 depending on the flue length, whether it’s rigid or flexible, and access issues.
How we do it
We drop a camera first, then install a DuraFlex or equivalent liner sized to the appliance, insulate where code requires, and verify the connection at the appliance collar and termination.
Chimney Flashing Repair
Signs you need it
You have a ceiling stain near the fireplace, or the roof is showing water damage where the chimney penetrates the deck.
What it costs in Encino
Flashing repair in Encino runs about $350 to $900 for typical step-flashing resealing, including stripping the old sealant and re-bedding the joints.
How we do it
We expose the roofing around the chimney, reset or replace the step and counter flashing with proper overlap, and seal the transitions with a polyurethane sealant.
Chimney Crown Repair
Signs you need it
The concrete crown on top of the chimney is cracked, spalling, or has a visible gap where water can pool and soak into the masonry.
What it costs in Encino
Crown repair in Encino is typically $450 to $1,100, with a full resurfacing or recasting on the higher end of that range.
How we do it
We clean out the damaged concrete, build small repairs with a Portland-based crown mix, or cast a new crown with proper expansion space around the flue tile.
What Chimney Repair Costs in Encino
| Item | Typical range in Encino |
|---|---|
| Chimney cap installation | $225 – $650 |
| Chimney cap replacement | $275 – $550 |
| Chimney flashing repair | $350 – $900 |
| Chimney crown repair | $450 – $1,100 |
| Chimney liner installation | $1,200 – $3,500 |
Do I really need a new liner, or can my chimney be repaired another way?
If your clay liner has cracked tiles but the surrounding masonry is sound, HeatShield resurfacing can often restore the flue without a full tear-out. We’ll show you the camera footage so you can see exactly what we’re seeing before you decide. Call (833) 467-6493 for an assessment.
Can you repair a chimney that hasn’t been used in years?
Yes, and that’s most of what we see in Encino. Unused chimneys still take on water, host animals, and degrade at the crown and flashing. We inspect first, then quote repairs based on what’s actually damaged, not on age alone.
Brands We Service in Encino
Chimney repair in Encino runs on the materials we stock and install, and we name them because they matter. DuraFlex liners, HeatShield resurfacing systems, Famco caps, and Copperfield flashing all show up regularly on Encino job sheets. Having these on hand means fewer return trips and faster turnarounds. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Encino, CA
| Service | Typical range in Encino |
|---|---|
| Chimney sweep and inspection | $165 – $295 |
| Dryer vent cleaning | $130 – $240 |
| Chimney cap installation | $225 – $650 |
| Chimney cap replacement | $275 – $550 |
| Chimney flashing repair | $350 – $900 |
| Chimney crown repair | $450 – $1,100 |
| Chimney liner installation | $1,200 – $3,500 |
The main thing that pushes pricing up in Encino is access: two-story chimneys on hillside homes, steep roof pitches in 91436, and flues that need scaffolding to reach all add labor. We quote a flat price before any work starts, so the number you approve is the number you pay. Call (833) 467-6493 for a written estimate.
Neighborhoods We Serve in Encino
Glendale Chimney Sweep covers the full Encino area, from the flats north of Ventura Boulevard down into the hills. That includes the older ranch clusters and the newer custom rebuilds where chimneys are often decorative but still need to vent correctly and stay watertight. We typically schedule Encino visits within a few days of the call, and we group appointments by area so we can get to you sooner.
- Encino Hills (91436)
- South of the Boulevard
- Encino Village
- Amestoy Estates
- Lanai Road area
Service Area – Cities Near Encino
We serve Encino and the surrounding San Fernando Valley communities. If you’re in Sherman Oaks, CA, Van Nuys, CA, Valley Glen, CA, or Northridge, CA, we can schedule chimney and dryer vent work the same way we do here. Most nearby appointments are booked within the week.
Serving Encino, CA — Our Local Coverage Area
We’re based in the Encino area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Encino
Most Encino appointments are scheduled within two to five business days. If you’re in escrow and need a chimney inspected for a real-estate transaction, let us know when you call and we’ll do our best to get you on the calendar before your contingency window closes.
Most chimney sweeps, cap installs, and flashing repairs don’t require a permit. Liner installations and structural rebuild work may, depending on scope. When a permit is required, we’ll tell you at the quote stage and handle the details. Call (833) 467-6493 to discuss your specific chimney.
Yes. We regularly do both in a single visit for Encino homeowners, saving a return trip. The chimney gets swept and inspected, the dryer vent gets cleaned, and you get a photo report for both systems when we’re done. Ask for the combined visit when you book.
Call Glendale Chimney Sweep at (833) 467-6493 for a free, upfront estimate on chimney repair, chimney sweeping, or dryer vent cleaning in Encino. We inspect first, document everything with camera, and quote flat before we start.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Encino Customers Say
"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
— Luis Ramirez"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
— Erin Doyle"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
— Rafael Guzman