Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Beverly Hills, CA | Glendale Chimney Sweep
We provide independent Gelco chimney cleaning near Century City and service across Beverly Hills, including the 90210 and 90212 ZIP codes, and our work here centers on one thing: most Gelco inserts in this city sit idle for months at a time, so the real job is removing glazed creosote that never got hot enough to burn off and verifying the flue actually vents where it’s supposed to. We’re not manufacturer-affiliated or authorized by Gelco, but we know their equipment well enough to service it honestly. Call (833) 467-6493 for a free estimate.
Why Beverly Hills Residents Choose Us for Gelco Service
Working on Gelco units in Beverly Hills means understanding how they age when a fireplace is used for ambiance, not heat. That’s a different failure profile than a unit burning nightly in a colder climate. Noel Tarkanian, owner of Glendale Chimney Sweep, grew up in Montrose and learned early that fireplaces demand attention even when they’re rarely lit. He picked up the trade through the HVAC and sheet metal program at Glendale Community College before moving into chimney work exclusively, and he’s been diagnosing flues throughout the greater Los Angeles area ever since. We stock OEM Gelco parts where they’re still available and use quality aftermarket equivalents for wear items like gaskets and damper hardware when OEM supply has dried up. For Gelco sales & service, we’re the shop that names the brands we use because we stand behind them.
Styles & brands we work with
Common Gelco Chimney Cleaning Problems We Solve in Beverly Hills
- Glazed creosote on Gelco insert glass and baffles. Beverly Hills fireplaces burn gas-starter or Duraflame logs a few times a year, so the unit never gets hot enough to burn residue off. It sits and hardens into a glaze that takes mechanical removal, not just brushing. Light use doesn’t mean a clean flue; it often means the opposite.
- Seized or warped Gelco dampers. Long idle stretches between fires let damper assemblies corrode or bind, especially in 1920s-1950s homes in the Flats where original brick fireboxes and clay-tile flues were later fitted with Gelco inserts. The damper seizes, and the first cool evening brings smoke back into the living room.
- Multi-flue and custom Gelco caps under Santa Ana wind stress. Hillside homes above Sunset and in the Trousdale and Post Office tracts expose chimney caps to dry, gusty conditions that corrode metal and tear spark-arrestor mesh. A damaged cap lets embers out and birds or roof rats in.
- Gelco inserts venting into sealed chases after remodels. We find this on hillside streets off Benedict and Coldwater Canyon with regularity. A previous owner capped or rerouted the flue during a remodel, so the Gelco insert looks clean inside the firebox but drafts smoke back into the room. The flue has to be camera-verified.
- Misaligned liner and damper connections after retrofit installs. Beverly Hills homes have been remodeled repeatedly, and flue liners and dampers rarely match the original plans. When a Gelco insert was dropped into an older clay-tile flue without proper adaptation, the draft suffers and creosote collects in the offset.
Gelco Service in Beverly Hills: What Local Conditions Mean for Your Equipment
In the hillside streets off Benedict and Coldwater Canyon, chimney sweeps routinely find that a previous owner capped or rerouted the flue during a remodel, so the fireplace in the living room actually vents into a sealed chase. The giveaway is a firebox that looks spotless but drafts smoke back on the first cool night. That’s a pattern unique to this city’s prestige-remodel culture. A Gelco insert in a 1950s Spanish Colonial in the Flats rarely has this problem because the original chimney was never touched, but a 1960s Trousdale rebuild with later work done? Different story. For Beverly Hills estates, the maintenance reality is that we’re documenting and verifying as much as we’re cleaning. Annual inspection, creosote removal from gas-starter and Duraflame log residue, and keeping the firebox and flue camera-ready for resale inspections and insurance reviews. Scheduling, discretion, and a written photo report aren’t extras here; they’re the actual deliverable.
Gelco Models & Products We Service in Beverly Hills
Our crew services Gelco wood-burning fireplace inserts, Gelco gas fireplace inserts and gas log sets, Gelco multi-flue and custom chimney caps, and Gelco firebox and damper assemblies. We take an OEM-first approach when parts are still in production, and we’re honest about when they’re not. For gaskets, damper hardware, and other wear items with discontinued OEM supply, we use aftermarket equivalents that match or exceed the original spec. Most Gelco units we see in Beverly Hills need service and correct venting, not replacement. That said, if a firebox or damper is structurally compromised, we’ll say so plainly rather than patch it.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Beverly Hills
Gelco chimney cleaning in Beverly Hills typically falls between $195 and $325 for a standard sweep, depending on the unit, flue configuration, and how long it’s been since the last service. If a sealed-chase situation requires a Level 2 camera inspection, expect $350 to $550 for the full documentation. Damper repair or replacement adds $150 to $450, and multi-flue cap work on hillside chases above Sunset often runs $300 to $650 depending on access and whether the cap is custom Gelco or a standard profile. The estimate is free, and we’ll tell you before any work starts what the camera shows and what can safely wait. Call (833) 467-6493 for an exact quote.
Serving Beverly Hills, CA — Our Local Coverage Area
We’re based in the Beverly Hills area and also handle Gelco repair in West Hollywood, so we know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Beverly Hills
Because the flue isn’t venting where you think it is. In Beverly Hills hillside homes off Benedict and Coldwater Canyon, we routinely find smoke-back caused by a prior remodel that capped or rerouted the flue, leaving the Gelco insert venting into a sealed chase. The firebox looks immaculate because nothing has been drafting through it. The fix starts with a Level 2 camera inspection to verify the actual flue path, then reconnect or reroute as needed. Call (833) 467-6493 and we’ll get the camera into the right place.
For a resale or insurance review in Beverly Hills, you almost always need a Level 2 inspection, which includes camera documentation of the flue interior, smoke chamber, and damper assembly. Level 1 is a visual check of accessible surfaces. If the home is in the Flats with an original 1920s-1950s clay-tile flue or on a hillside where prior remodels may have rerouted things, the photo report from a Level 2 becomes part of the transaction file. We provide written documentation with every inspection, and our Beverly Hills service area coverage includes same-week scheduling for escrow deadlines.
Three fires a year in a decorative fireplace produces hard, glazed creosote, not the fluffy, brushable kind. Gelco insert glass and baffles never reach the temperature needed to burn off gas-starter or Duraflame log residue, so it accumulates and hardens during the long idle stretches. That glaze requires mechanical removal and chemical treatment, not just a standard sweep. Call (833) 467-6493 and we’ll tell you what your unit actually needs after we see it.
Yes. Multi-flue and custom Gelco caps on Trousdale and Post Office tract homes take a beating from Santa Ana winds that tear spark-arrestor mesh and corrode fasteners on exposed hillside chases. We replace mesh, re-secure cap assemblies, and when the original Gelco cap is beyond saving, we source a proper replacement rather than rigging a universal fit. The access on these hillside chases varies widely, so pricing reflects what we’re actually working with. Call (833) 467-6493 and we’ll schedule a look.
Most Gelco dampers in Beverly Hills go unused for long stretches, and the hardware corrodes or binds. If the damper plate is intact and the linkage is just stiff, repair makes sense: we clean, lubricate, and adjust, and you’re back in service for under $200. If the plate is warped or the assembly is structurally compromised, we’ll say so and recommend replacement with an OEM Gelco part or a quality aftermarket equivalent. We don’t upsell replacement when repair is the right call, and we’ll show you photos either way. Call (833) 467-6493 for a straight answer.
Service Areas Near Beverly Hills
We serve Beverly Hills and the surrounding communities: Gelco service in Shadow Hills, Gelco service in East San Gabriel, plus Glendale, Silver Lake, Burbank, Echo Park, Hollywood, and La Cañada Flintridge. If you’re within reasonable reach of the 90210 or 90212 ZIP codes, we’ll make the drive.
Book Your Gelco Service in Beverly Hills Today
A clean chimney isn’t a luxury – it’s just basic fire safety. If you own a Gelco insert in Beverly Hills — or need Gelco repair in Hollywood — and want a straight answer about what’s happening in your flue, call (833) 467-6493. We’ll schedule a time that works, arrive with drop cloths and camera gear, and hand you a photo report at the end.
Written by Noel Tarkanian, Owner at Glendale Chimney Sweep, serving Beverly Hills chimney and dryer vent care with brand-specific expertise.