Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Bloomington
A chimney sweep in Bloomington costs between $179 and $289 for a standard open fireplace cleaning and inspection. Most Bloomington homes we service were built between the 1950s and 1970s, which means original clay-tile flue liners that have been heat-cycling for over half a century. Our team knows exactly what those chimneys look like on the inside, because we’ve run cameras up hundreds of them across the 92316 zip code. If you need a sweep before burning season, call (833) 467-6493 and we’ll get you on the schedule.
Why Glendale Chimney Sweep Is Bloomington’s Preferred Chimney Sweep Company
Bloomington sits in an exposed corridor between the Cajon Pass and the I-10, and the wind that funnels through here changes how chimneys collect debris. We’re familiar with the post-Santa Ana pattern: tumbleweeds jammed into caps, sand packed into ash pits, and flues that look like a dust storm blew through them. Customers in Bloomington keep calling us back because we show them the camera footage before recommending any repair. Noel Tarkanian founded this company on a straightforward rule: no liner quote without monitor evidence the homeowner can see for themselves.
That matters in a town with as many aging masonry fireplaces as this one. Bloomington’s housing stock tilts heavily toward mid-century tract construction, and those chimneys were built well but they weren’t built for fifty years of use. When a sweep finds cracked spalling in an original clay-tile liner, we don’t deliver the news as a surprise upsell. We show the homeowner the exact joint, explain what it means, and let the evidence do the talking. That’s why homeowners here trust us over generalist handymen who can’t verify what they claim.
We cover all of Bloomington’s residential neighborhoods, including the streets north of Jurupa Avenue, the older pockets near Alder Avenue, and the homes along Cedar Avenue and Slover Avenue. Scheduling is straightforward: call (833) 467-6493, tell us what you’re burning and when you last had a sweep, and we’ll set a time. We group Bloomington jobs to keep drive time down, which means we can usually get to you faster than a Los Angeles-based company fighting traffic on the 10.
Styles & brands we work with





Fireplace Cleaning in Bloomington
Fireplace Cleaning in Bloomington takes on a particular shape because of how the Santa Ana winds interact with open chimneys. A standard fireplace cleaning here involves removing soot and creosote from the firebox, smoke chamber, damper, and flue, then vacuuming out the ash pit and checking the spark arrestor. In Bloomington, the ash pit often contains windblown sand layered beneath the ash, and the exterior cap frequently holds tumbleweeds or dried brush from the last big wind event. We clear all of it and note anything that blocked the flue, because a blocked flue in this fire-risk corridor is not something to ignore.
Creosote and Soot Removal
Creosote build-up is the single most common finding in Bloomington chimneys. Wood burned here during the mild winters tends to smolder at lower temperatures, especially in older stoves and fireplaces, which produces first-degree and second-degree creosote that clings to flue walls. We remove it with rotary brushes sized to your flue, not a one-size-fits-all sweep. If we find third-degree creosote, a hardened glaze-like layer, we’ll say so plainly and explain what it takes to remove it safely.
Annual Sweep and Fireplace Cleaning
An annual sweep in Bloomington should happen before the first fall burn, not after. The long idle stretch from spring through early autumn gives pests time to nest, dust time to settle, and creosote time to harden. We recommend scheduling around late September or early October, before the first cold night. It’s a modest cost, typically $179 to $229 for a standard open fireplace, and it’s the cheapest insurance against a chimney fire.
Chimney Services in Bloomington
Chimney Services in Bloomington go beyond the basic sweep, because the chimneys here are old enough to need real evaluation. A Level 1 inspection is included with every sweep at no extra charge, but Bloomington homeowners with original clay-tile liners and masonry that’s been through decades of heat cycles often need a Level 2 inspection. That’s a video scan of the entire flue interior, top to bottom, and it’s the only way to see what’s happening behind the brick. If you bought your home without having the chimney camera-scanned, or if you’ve burned for years without one, this is the service that answers the question you’ve been quietly asking.
Level 1 and Level 2 Inspections
A Level 1 inspection covers what we can see with the naked eye from the firebox, damper, and accessible portions of the flue. A Level 2 inspection adds a closed-circuit camera through the full length of the flue, plus a check of the attic and crawlspace areas where the chimney passes through framing. For Bloomington’s 1950s and 1960s masonry fireplaces, a Level 2 runs $249 to $399 depending on access. We recommend it when a home has changed ownership, after a chimney fire, or when a sweep finds something that needs a closer look.

Flue Liner Assessment and Repair
The most consequential work we do in Bloomington isn’t sweeping; it’s figuring out whether a cracked clay-tile liner can be repaired. HeatShield resurfacing, which we’re authorized to apply, can restore a deteriorating flue without a full relining tear-out. That’s a meaningful option for Bloomington homeowners whose chimneys show spalling joints but still have intact upper tiles. We only recommend it when the camera footage supports it, and every quote is backed by images you can review with us on-site.

What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Bloomington
We don’t install generic parts and call it good. Our Bloomington customers see specific brand names on their quotes because we spec materials the professional chimney industry actually relies on. That includes HeatShield for flue resurfacing, Olympia Chimney for caps and chase covers, and Copperfield components for masonry repairs. We keep common parts and tools stocked for quick turnaround on Bloomington jobs, so you don’t wait a week for a part to ship from the East Coast. When we quote a repair, the brand is in writing. If a contractor can’t name what they’re putting in your chimney, that’s the first question to ask.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Sweep Problems We See in Bloomington Homes
- Tumbleweed and windblown debris in chimney caps. Bloomington’s position in the wind gap between the Cajon Pass and the I-10 means exterior caps and spark arrestors take a beating. After a strong Santa Ana, we routinely find tumbleweeds crammed into caps and sand packed into ash pits, a debris pattern flues in denser metro areas just don’t see.
- Spalling in original clay-tile flue liners. The mid-century tract homes throughout 92316 were built with clay-tile liners that crack and flake after decades of heating and cooling cycles. Those gaps let creosote and heat reach framing with no visible sign at the firebox, which is why camera inspection matters here more than in newer housing stock.
- Pest nests and debris from long idle stretches. Bloomington winters are mild, which means fireplaces sit unused for six to eight months. Birds, rodents, and insects find their way in, and first-degree creosote builds quietly until the first burn of the season. A sweep before fall catches all of it.
- Clay-tile liners damaged by heat cycling with no firebox-visible warning. The cracks form up inside the flue, far above where a homeowner can look. By the time spalling is visible from the firebox or top of the chimney, the liner has usually been compromised for years. Level 2 camera scans find these before they become a fire.
Pricing for Chimney Sweep in Bloomington, CA
A standard open fireplace sweep and Level 1 inspection in Bloomington runs $179 to $289. A Level 2 inspection with full video scan runs $249 to $399. Creosote removal for heavy third-degree buildup can add $80 to $150 depending on severity and flue diameter. HeatShield resurfacing is quoted per job after camera assessment, and it’s not cheap, but it’s a fraction of what a full liner tear-out would cost on a 1960s masonry chimney. What changes your price: the flue’s condition, accessibility on the roof, and whether your firebox needs substantial debris removal. We quote everything up front and we bring the camera footage to back it up. Call (833) 467-6493 for a free estimate.
We Also Serve Cities Near Bloomington
Our Chimney Sweep routes cover Bloomington and the surrounding Inland Empire communities. We regularly schedule work in Fontana, Rialto, Glen Avon, and Pedley. If you’re in any of those neighborhoods, the same camera-first standard applies. See our Chimney Sweep in Bloomington page for local details, or call (833) 467-6493 to book directly.
Serving Bloomington, CA — Our Local Coverage Area
We’re based in the Bloomington area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Bloomington
Yes. Light use is exactly why some Bloomington chimneys get worse. The firebox stays cold, creosote from the last burn hardens, and the long idle stretch lets pests and debris gather in the flue. An unburned chimney can be in worse shape than one that’s been used regularly, because the problems build without the heat that would have broken some of it down. A basic sweep and inspection costs less than $300 in Bloomington, which is a small sum compared to what a hidden flue crack can do. Call (833) 467-6493 to schedule one before fall; estimates are free.
A Level 2 inspection in Bloomington adds a closed-circuit camera run through the full flue interior, which shows cracking, spalling, and blockage that a sweep alone cannot see. For the 1950s and 1960s masonry fireplaces common in 92316, that camera footage is the only way to find clay-tile liner damage hidden above the firebox. We review the video with you on-site, which means you see exactly what we see. If we recommend a repair, it’s backed by images you can look at yourself, not a verbal description. For pricing and scheduling, call (833) 467-6493.
Santa Ana winds in Bloomington drive tumbleweeds, branches, and windblown sand directly into exterior chimney caps and spark arrestors. We’ve pulled tumbleweeds the size of beach balls out of capped flues on the Cajon Pass side of town. If the cap is missing or damaged, the flue stays blocked long after the wind dies down and becomes a fire hazard. An annual sweep in this corridor includes checking and clearing the cap, and we’ll tell you if it needs replacement. Call (833) 467-6493 and we’ll get eyes on your cap before the next wind event.
First-degree creosote is a light, dusty film that brushes off easily. Third-degree creosote is a hard, shiny glaze bonded to the flue wall; it’s highly combustible and much harder to remove. In Bloomington, we see both, but third-degree is more common in older stoves and fireplaces where wood smolders at low temperature. The removal cost depends on severity, but leaving it in place is how chimney fires start. If you’ve burned for years and never had a sweep, call (833) 467-6493 and we’ll assess what’s actually in your flue.
Yes, and there are two main approaches in Bloomington. HeatShield resurfacing can restore a deteriorating clay-tile liner by applying a ceramic layer over the existing flue, which works when the original tiles are cracked but the structure is still sound. When the liner is too far gone, a DuraFlex flexible liner system can be installed, which suits the offset and irregular flues typical in 1950s and 1960s masonry fireplaces. The right call comes down to what the camera shows. Call (833) 467-6493 and we’ll do a Level 2 scan before recommending either one; Free estimates are standard.
Written by Noel Tarkanian, owner of Glendale Chimney Sweep, serving Bloomington and the Inland Empire.