Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Temple City
Most Temple City homes were built between the 1940s and 1960s, and so were their fireplaces. That means we spend a lot of time in 91780 working on original brick chimneys with clay flue tiles that have seen decades of intermittent use, quiet remodeling, and San Gabriel Valley weather. A typical sweep here runs $189 – $249, and a Level 1 inspection adds $99 – $149. Call Glendale Chimney Sweep at (833) 467-6493 and we’ll tell you straight what your chimney needs.
We know the tight-lot postwar tracts between Las Tunas Drive and Lower Azusa Road well enough to tell you before we arrive whether your roof access is going to be awkward. That’s the kind of thing that matters when you’re booking a sweep, and it’s why Temple City homeowners call us instead of a stranger from across the county.
Why Glendale Chimney Sweep Is Temple City’s Preferred Chimney Sweep Company
We earn Temple City’s business by treating every chimney like it’s our own, and by naming the materials we use. That second part matters more than most people expect. When we install a Temple City HeatShield service liner system or a Famco cap, you know exactly what went into the job. No mystery parts, no generic workmanship. Temple City customers appreciate that kind of transparency, and they tell their neighbors.
Our techs are led by Noel Tarkanian, a name you’ll see on every quote and work order. Noel has built the company around a simple principle: diagnose thoroughly, explain clearly, and never recommend work the homeowner can’t verify. For a Temple City homeowner looking at a chimney that hasn’t been opened in years, that’s the difference between a brush-and-go and an honest assessment.
Response time to Temple City is typically two to three business days for a routine sweep, and we keep our schedule padded for the weeks before burning season. If you’re on the south side near Longden Avenue or up by Live Oak Park, we’ll give you a straight arrival window when you book.
Our Chimney Sweep team has served enough mid-century ranches in Temple City to know what a postwar masonry flue looks like inside before we even set up the ladder. That local experience means fewer surprises and more accurate quotes.
Styles & brands we work with
Chimney Services in Temple City
Chimney Services in Temple City cover more than brushing soot out of the flue, because the real work here is often figuring out what a 1955 chimney looks like after sixty years of add-ons, rebuilds, and deferred maintenance. When a homeowner near Temple City Park calls us for a sweep, we’re also checking the smoke chamber, damper linkage, crown condition, and whether the flue still matches what the firebox is actually doing.
This kind of work runs $189 – $249 for a standard sweep, with Level 1 inspections at $99 – $149 and Level 2 inspections (which we recommend before any property sale or after a remodel that touched the chimney) at $299 – $449. These are real Temple City market figures, not countywide averages.
Creosote and Soot Removal
Most Temple City fireplaces see light, sporadic use. But that creates a specific problem: the creosote that does form sits in the flue for years, hardening through repeated heating and cooling cycles. By the time we arrive, what started as first-degree soot may have become brittle, glazed third-degree creosote that a brush won’t move. We remove it properly and tell you honestly how it got there.
Annual Sweep and Fireplace Cleaning
An annual sweep in Temple City isn’t about heavy use. It’s about catching what’s happened during the months you weren’t using the fireplace at all: birds’ nests, palm frond debris, rusted damper parts, and cracked flue tiles that went unnoticed. A clean inspection record also makes the next quote more predictable, because we’ve already mapped your flue.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Sweep Certified in Temple City
Chimney Sweep Certified work in Temple City means the person on your roof knows the difference between a 1950s masonry chimney that’s still original and one that’s been quietly modified during a remodel. That distinction drives everything we do here, because a standard sweep on a modified flue can miss exactly what matters: the mismatch between an old clay liner and a newer firebox’s draft requirements.
A certified sweep in Temple City takes about 60 – 90 minutes for a typical single-story ranch, and we protect the work area with drop cloths and a HEPA vacuum that keeps dust out of your living room. If you’ve added a wood stove insert to a chimney originally built for an open hearth, we’ll inspect the liner joints and connector pipe more closely, because that’s where the heavier creosote loading shows up.
Level 1 and Level 2 Inspections
A Level 1 inspection confirms the chimney is safe for continued use as-is. We do one on every sweep we perform in Temple City, because skipping it would be irresponsible. A Level 2 inspection goes further with camera documentation of the flue interior, which matters when you’re buying a home on a teardown-rebuild street, or when your original chimney was flanked by a new two-story build next door.
HeatShield Liner Resurfacing
When a cracked clay liner is caught at the right stage, a full reline may not be necessary. We apply a HeatShield resurfacing system that restores a smooth, continuous flue surface without the disruptive tear-out. For Temple City homeowners who want to keep their original fireplace functional, this is frequently the most sensible repair our Chimney Sweep in Temple City team recommends.
Trusted Brands We Service in Temple City
We stock and install professional-grade chimney components from brands the industry actually specifies by name. In Temple City, that means HeatShield liner systems for cracked clay tiles, DuraFlex flexible liners for offset or retrofit flue runs, and Famco caps for homes where an old cap has rusted through and allowed debris to pack the flue. We name these products in our quotes because we stand behind them. If a Temple City homeowner asks why one liner costs more than another, we can tell them exactly what they’re paying for, and we keep common parts on the truck so most repairs don’t require a return visit.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Sweep Problems We See in Temple City Homes
- Mismatched fireboxes and flues. A 1955 ranch on a quiet street near Cloverly Avenue gets a rear family room addition, the firebox gets rebuilt with a modern steel unit, and the original clay liner stays in place. We see this constantly, and it’s why a standard sweep often turns into a reconciliation job.
- Missing or rusted chimney caps. Temple City’s tight postwar lots pack houses close together, and patio covers or trellis additions make roof access awkward. The cap gets neglected, rusts out, and a bird builds a nest that blocks the draft before the first cool-weather fire.
- Third-degree creosote in wood-stove inserts. A fireplace built for occasional ambiance fires gets retrofitted with an insert for primary heat, but the liner was never upgraded. We see heavily glazed creosote in these flues that a brush won’t touch.
- Flashing repairs deferred too long. The dry San Gabriel Valley climate can make roof leaks seem rare, so cracked flashing around a 60-year-old chimney goes ignored until a Santa Ana wind storm drives water under the shingles.
Pricing for Chimney Sweep in Temple City, CA
Here’s what you should expect to pay in Temple City, straight from our current rate sheet. A standard chimney sweep runs $189 – $249. A Level 1 inspection adds $99 – $149, and a Level 2 inspection with camera documentation runs $299 – $449. If we find damage that requires a repair, you’ll get a separate quote with the exact brand and material specified, and nothing gets done without your approval.
What affects the price most in Temple City is roof access. Single-story ranches on flat lots are straightforward. A two-story rebuild with a roof pitch that requires additional ladder equipment will cost more, and so will a flue packed with palm fronds or a bird’s nest that takes extra time to remove. Call (833) 467-6493 for a free estimate. We’ll tell you the price before we schedule, not after we arrive.
We Also Serve Cities Near Temple City
If you’re a homeowner in North El Monte, Rosemead, San Gabriel, or Arcadia, we work there too. Our service area covers the surrounding San Gabriel Valley communities, and a chimney inspection in Temple City is the same thorough job you’ll get anywhere else we work.
Serving Temple City, CA — Our Local Coverage Area
We’re based in the Temple City area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Temple City
Every six months, or after each cord of wood burned, whichever comes first. Wood stove inserts in Temple City create far heavier creosote loading than open-hearth masonry fireplaces, because the stove burns cooler and longer. Even with dry wood, the flue will accumulate deposits faster than a fireplace built for occasional ambiance fires. Call (833) 467-6493 and we’ll help you set a schedule that matches your actual burn rate.
We’ll almost certainly find a blocked or partially blocked smoke chamber, decades of accumulated soot and debris, and probable flue tile damage that a camera inspection will document. On a Temple City home of that vintage, it’s also common to find that the damper linkage has rusted or disconnected, and that the original clay liner has cracks from years of thermal cycling. We’ll show you the camera footage, and nothing gets recommended without visual evidence.
Yes, we can. Patio covers and trellises are common in Temple City’s compact lots, and they do make roof access more involved. We bring the right ladder setup and sometimes need to work from a second access point. What we don’t do is skip the inspection because access is inconvenient. If your roof is genuinely unsafe to walk, we’ll tell you and talk through options. Call (833) 467-6493 for a straight answer about your specific roofline.
First-degree creosote is a flaky, dry soot that brushes off easily. Third-degree creosote is a glazed, tar-like coating that hardens inside the flue and cannot be removed with a standard brush. It matters in Temple City because the most common path to third-degree buildup is a wood stove insert added to a chimney originally built for an open fireplace, which is precisely the remodel pattern we see across 91780. Third-degree creosote is also the most combustible form, and it requires mechanical removal or chemical treatment before the chimney is safe to use.
We service both. Factory-built chimneys on newer two-story rebuilds use completely different components than a 1950s masonry chimney, and the inspection points are different too: pipe joints, clearance to combustibles, and the condition of the chase top. We carry parts for both systems and we’ll tell you which type you have, because plenty of Temple City homeowners inherit a house with one kind and assume they own the other. Estimates are free, so call us at (833) 467-6493 if you’re not sure.
Written by Noel Tarkanian, Owner at Glendale Chimney Sweep, serving Temple City and the San Gabriel Valley.