Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Dryer Vent Cleaning Across Claremont
Dryer vent cleaning in Claremont typically runs $139 to $249 for a single-family home, with most jobs completed in under two hours. Our crew works the Village, the historic tracts near the Claremont Colleges, and the ranch-home neighborhoods south of Foothill Boulevard every week, so we know what a pre-1940s soft-brick penetration looks like before we even pull the hose. If you live in 91711 and your dryer takes two cycles to get towels dry, that’s a clogged or damaged vent talking. Call Glendale Chimney Sweep at (833) 467-6493 and we’ll get it sorted.
Why Glendale Chimney Sweep Is Claremont’s Preferred Dryer Vent Cleaning Company
We work in Claremont homes that most vent-cleaning crews never see. The Village-area Craftsman bungalows and Spanish Colonial Revivals near the Colleges were built with soft local brick and lime mortar. That matters when you’re running a vent through original masonry, because those penetrations crumble differently than the modern framing you’d find further east in Montclair or Upland. Our techs expect that before they start, and they bring flashing repair materials on the truck instead of telling you to call a mason after the fact.
Noel Tarkanian runs the company with the same approach on every job: diagnose first, photograph what you find, and quote only what the photos support. That’s why Claremont homeowners with 1920s and 1930s fireplaces prefer us. They want the straight answer about whether their dryer vent run is the actual problem or whether that Santa Ana backdraft through the adjacent flue is what’s pushing hot air and lint back into the laundry room. We give it to them.
We stock stainless steel vent caps, collars, and termination hardware locally, because the galvanised stuff fails fast against dust, soot, and the salt-tinged air that pushes through the South Coast Air Basin in fall. When we say we can replace a seized dryer vent cap in Claremont during the same visit as the cleaning, that’s because the parts are already on the van, not ordered online while you wait.
Styles & brands we work with
Our Dryer Vent Cleaning Services in Claremont
Our Dryer Vent Cleaning team handles the full scope of dryer vent work in Claremont, from routine lint clearing to terminations and adjacent flue inspection. Here’s a closer look at what we do:
Dryer Vent Line Cleaning and Lint Removal
A standard residential dryer vent run in Claremont is anywhere from 8 to 25 feet, and the tighter the bends, the faster lint compacts. We run professional rotary brush equipment through the line, not a drill attachment from the hardware store. That matters because the original homes near the Village often have vents sleeved through masonry with butter joints that a cheap brush can rattle apart. We remove the lint, check static pressure, and tell you what the airflow reading means in plain numbers.
Vent Cap and Termination Replacement
We see galvanised vent caps on Claremont homes that look like they’ve been through a decade of beach weather. The dry air, persistent Santa Ana dust, and occasional moisture push galvanised to seize early, and once the flap stops opening, lint packs behind it. We recommend stainless steel terminations for any pre-1940s house in the historic core. On a Village-area Craftsman near the Claremont Colleges, our crew pulled a dryer vent stack sleeved through original soft-brick masonry and found the galvanised cap had corroded and the termination flap seized from years of dust and soot. We swapped in a stainless DuraFlex termination and re-flashed the penetration, then ran a Level 2 inspection on the adjacent firebox. The clay-tile flue liner showed spalling at the smoke chamber from the same exposure.
Masonry Penetration Re-Flashing
Vents punched through pre-1940s brick are a weak point. Lime mortar breaks down, water and dust get in, and spalling follows. We re-flash the penetration with proper step flashing and sealant rated for masonry, not a tube of caulk from the supermarket. This is the difference between a vent that stays dry for the next decade and one that rots the surrounding brickwork in three years.
Level 2 Inspection of Adjacent Flues and Fireboxes
In Claremont’s older homes, the dryer vent and the chimney often share the same wall. We can run a Level 2 camera inspection on the adjacent flue while we work on your dryer vent, checking for cracked clay liners, spalled smoke chambers, and signs of backdraft. That’s not upselling. It’s useful information. If you buy a 1928 Spanish Colonial in the Village, you should know whether that chimney was ever lined to modern standards.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Claremont
We’re authorized to work with HeatShield, Gelco, and Olympia Chimney products, which means when a flue liner is resurfaced or a vent termination needs replacing, we’re installing the same systems professionals specify. We stock stainless termination kits locally for Claremont jobs, and we order liner material in bulk so we don’t make you wait three weeks for a part. For complex retrofits in homes with offset flues, we also install DuraFlex flexible liner systems, which handle the bends that rigid-liner crews walk away from. We name the brands we use because we stand behind them.
See the difference
Before
After
Before
After
Before
AfterCommon Dryer Vent Cleaning Problems We See in Claremont Homes
Claremont has its own patterns. Here’s what shows up most often in our work across Claremont:
- Seized galvanised caps on pre-1940s masonry. The historic-core homes from the Village to Memorial Park still have original vent penetrations with galvanised terminations, and those caps lock up from dust, soot, and moisture. When the flap won’t open, lint backs up while the dryer keeps pushing.
- Spalling around vent penetrations. The soft brick and lime mortar around original vent holes crumbles eventually. Once the seal breaks, Santa Ana winds push dust and cold air into the laundry run, and the lint gets wet, sticky, and harder to remove.
- Undersized or unlined flues causing backdraft. Chimneys drafted for the old onshore flow often can’t handle the reverse flow of a Santa Ana event. Dryer exhaust and even creosote odor can push back into the house through a shared wall or open firebox.
- Long horizontal dryer vent runs in 1950s and ’60s ranch homes. South Claremont’s ranch tract homes often put the laundry room at the opposite end of a straight vent run, which means more lint accumulation and slower drying times as the line stretches and picks up sags.
Pricing for Dryer Vent Cleaning in Claremont, CA
Here’s where you can expect to land for Claremont work. A standard dryer vent line cleaning in a single-family home runs $139 to $189. If the run is long or packed with compacted lint, the price can reach $225 to $249. Vent cap replacement with a stainless termination runs $85 to $150 depending on mounting and access. Re-flashing a masonry penetration is a separate masonry job, usually $150 to $300, but we can quote it on-site, and we show you the photos before you decide. A Level 2 inspection of an adjacent chimney runs $225 to $325 in Claremont’s historic-core homes, because the fireboxes and smoke chambers are often hard to access. We don’t charge extra for Claremont travel, and estimates are free. The price we give before we start is the price you pay.
We Also Serve Cities Near Claremont
Our service area includes Montclair, La Verne, Upland, and San Antonio Heights. If you’re in one of those cities and need dryer vent cleaning or a chimney inspection, call us at the same number. We plan Claremont-area routes together so we can schedule same-week visits when the calendar allows.
Serving Claremont, CA — Our Local Coverage Area
We’re based in the Claremont area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dryer Vent Cleaning in Claremont
The historic-core homes in Claremont, especially around the Village and the Colleges, sit with old vent terminations exposed to dust and soot the same way coastal homes get salt air. Galvanised caps corrode and seize, the flap stops opening, and lint packs behind it. Homes further east in Upland or Rancho Cucamonga don’t face the same concentrated dust and moisture pattern, and their caps usually last longer. Solution: install a stainless termination. We keep them stocked for Claremont jobs, and the price difference is small enough that it rarely makes sense to go galvanised again. Call (833) 467-6493 for a free quote on replacement with cleaning.
We do, and we recommend it. When we run the dryer vent camera, we can also run a Level 2 inspection on the adjacent flue and firebox. In Village-area Craftsman and Spanish Colonial Revival homes, the dryer vent and chimney flue are often in the same masonry wall, so one inspection gives you a full picture. If we find spalling clay-tile liner or backdraft issues, you can see it in the camera footage before you decide what to fix. This is one of the most common “I didn’t know my 1920s chimney was unlined” conversations we have in Claremont.
First-degree creosote is a fine, sooty deposit that brushes off with standard cleaning. Third-degree is a hard, glazed tar that requires rotary chains or chemical treatment, and it forms when wood-burning fireplaces run at low temperatures with incomplete combustion. In Claremont’s foothill-adjacent homes, the dry Santa Ana air and the habit of lighting a fire on cool evenings tends to deposit more first-degree creosote, but older homes with unlined flues or gas conversions can trap the conditions for third-degree. It matters because third-degree creosote is a serious fire risk, and it’s the level most likely to require professional attention. If you’re not sure what yours is, a quick camera look settles it. Estimates are free.
It’s almost always a draft problem, and it’s more common in the pre-1940s historic-core homes than in newer subdivisions. The original clay flues in Claremont’s Craftsman and Spanish Colonial houses were sized for the prevailing onshore flow, which moves air up and away from the house most of the year. When a Santa Ana event reverses that flow, a short or unlined flue can backdraft, pushing smoke, dryer exhaust, and creosote odor back through the firebox or laundry area. The fix is typically raising the flue height, installing a proper liner, or adding a draft-inducing cap. We diagnose this with a Level 2 inspection and show you exactly what the airflow pattern looks like. Call us at (833) 467-6493 to schedule a check.
Have the dryer vent cleaned once a year. Have the chimney inspected at least once a year if you use it annually; if you use a wood-burning fireplace more than twice a week through fall and winter, do it every 60 to 80 fires. Claremont’s dry climate and Santa Ana winds mean debris and dust get into the flue even if you don’t use the fireplace, and that’s exactly what accumulates into a fire risk. Homes near the chaparral foothills should also make sure spark arrestors are intact before the burn season starts. We can schedule the dryer vent and chimney work on the same visit, saving you a second call.
Ready to book? Call (833) 467-6493 for a free estimate on dryer vent cleaning, vent cap replacement, or a Level 2 chimney inspection in Claremont. We bring the camera, the brushes, and the stainless parts.
Written by Noel Tarkanian, Owner at Glendale Chimney Sweep, serving Claremont and the surrounding foothill communities.