Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Fontana, CA
Fontana’s chimney repair work comes down to one thing: the city’s housing stock. Most homes in 92335, 92336, and 92337 were built between the 1950s and 1980s, and nearly all of them still have their original clay-tile flues. After 40 to 70 years of heating and cooling cycles plus Inland Empire seismic activity, those tiles crack, spall, or shift. We spend more time in Fontana relining and repairing aging masonry chimneys than sweeping pristine ones. If you’ve never had your flue inspected, call (833) 467-6493 and we’ll tell you exactly what’s going on inside it.
Why Fontana Homes Are Different
Fontana’s older tracts off Sierra Avenue and Citrus Avenue are full of original masonry fireplaces that have never been opened up for inspection. The clay liners in these chimneys were rated for decades of use, not the 50 to 70 years many have now logged. Dry Inland Empire summers bake creosote into a hard, glazed layer that a standard brush won’t remove. Then winter nights drop into the 30s, people burn wood regularly, and the flue is already compromised. Santa Ana winds don’t help either – they push downdrafts through cracked liners and can force smoke back into living spaces.
We also see something in Fontana that’s less common in neighboring cities: “sleeping” chimneys. During remodels, fireplaces get sealed off or covered with stucco, leaving the flue capped and abandoned. If the original furnace or water heater still vents into that same flue, you’ve got a carbon monoxide path nobody has looked at in years. A camera inspection finds this fast. Fontana’s combination of aging tract homes, real winter burning, and wind-driven downdrafts means a sweep here is less about tidiness and more about making sure the flue is still structurally sound.
Styles & brands we work with
Our Main Fontana Services
Most Fontana homeowners call us for one of two things: a chimney that hasn’t been swept in years, or a dryer vent that’s quietly building lint behind the wall. Both are safety work, and both are jobs we handle with the same camera-verified process.
Chimney Sweep in Fontana
Fontana’s wood-burning season is short but intense. Cool nights in the 30s and 40s get fireplaces going, and the creosote left behind bakes hard during hot, dry summers. By the time we arrive, many flues need rotary sweeping rather than a standard brush. We sweep the flue, remove glazed creosote, and camera-inspect the liner afterward so you’re not guessing about hidden cracks. If the tiles are spalling, we’ll show you the footage and walk through repair options without pressure. Chimney Sweep in Fontana has full details on what a sweep here involves.
Dryer Vent Cleaning in Fontana
Dryer vents in Fontana tract homes often run long horizontal distances through attics or crawl spaces, which means lint collects at every bend. The industry-recognized fire risk from blocked dryer vents is real, and we treat this as safety work, not a courtesy add-on. We pull the dryer, brush the full vent run, and verify airflow with a meter before we leave. In older Fontana homes where the vent exits through the roof, the accumulation is usually worse than anyone expects. Dryer Vent Cleaning in Fontana covers what a full cleaning includes.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Fontana
Chimney repair in Fontana almost always comes back to clay-tile liners that have outlived their service life. Homes built in the 1950s through 1980s across 92335, 92336, and 92337 have original masonry fireplaces, and after decades of thermal stress plus the region’s seismic activity, those tiles crack and spall. When we camera-inspect a Fontana flue, we’re usually documenting liner damage that needs either Chimney Repair through HeatShield resurfacing or a full DuraFlex reline. The good news is that most of this work can be planned around your burning season, not done in a panic.
Chimney Cap Installation
Signs you need it
You can see rain staining on the fireplace face or you’ve found birds, nesting material, or debris inside the firebox.
What it costs in Fontana
Chimney cap installation in Fontana typically runs $300 to $700 depending on flue size and whether a custom bracket is needed.
How we do it
We measure the flue opening, match a Famco or Copperfield cap to the tile dimensions, and secure it with a mechanical fastener system that won’t come loose in Santa Ana winds.
Chimney Cap Replacement
Signs you need it
The existing cap is rusted through, missing bolts, or was knocked off by wind and the flue is open to rain and animals.
What it costs in Fontana
Replacement cap with removal of the old unit and new hardware runs $350 to $750 in Fontana, with cost driven by flue size and roof access.
How we do it
We remove the damaged cap, inspect the flue tile for hidden cracks underneath it, and install a correctly sized Famco or Copperfield replacement with new hardware.
Chimney Liner Installation
Signs you need it
Camera inspection shows cracked or spalled clay tiles, or you’re upgrading an older fireplace and need a properly sized flue for the appliance.
What it costs in Fontana
Chimney liner installation in Fontana ranges from $1,200 for straightforward retrofit jobs to $4,000 for complex offset flues requiring DuraFlex flexible liners.
How we do it
We spec the liner by brand and diameter based on the appliance and flue dimensions, then run DuraFlex stainless steel through the existing chimney and insulate where clearance codes require it.
Chimney Flashing Repair
Signs you need it
Water stains appear on the ceiling near the chimney after rain, or the existing flashing has pulled away from the masonry and roof line.
What it costs in Fontana
Flashing repair in Fontana typically runs $600 to $1,600 depending on whether we’re resealing existing flashing or cutting and installing new step flashing at the roof line.
How we do it
We remove the damaged flashing, inspect the chimney crown and mortar joints behind it, then install new flashing with correct overlap and sealant rated for Inland Empire heat.
What Chimney Repair Costs in Fontana
| Item | Typical range in Fontana |
|---|---|
| Cap installation | $300 – $700 |
| Cap replacement | $350 – $750 |
| Flashing repair | $600 – $1,600 |
| Liner installation | $1,200 – $4,000 |
Prices push toward the upper end when roof access is steep, the flue is offset, or we find crown damage that has to be addressed before flashing can be sealed correctly. We quote a flat price before we start and we won’t recommend liner work without showing you the camera footage.
What’s the most common chimney repair in Fontana?
Clay-tile liner replacement or resurfacing. Most Fontana homes from the 1950s to 1980s have original tiles that crack after decades of thermal cycling and seismic activity. HeatShield resurfacing can often restore the flue without tearing out the old tiles. Call (833) 467-6493 to schedule an inspection and see the camera footage for yourself.
Do I need a new liner if my clay tiles are cracked?
Not always. Hairline cracks can sometimes be sealed with HeatShield resurfacing, which coats the existing flue and restores a smooth, insulated surface. If damage is extensive or the flue is offset, a DuraFlex stainless liner is the right call. We’ll show you the video before quoting either option.
Brands We Service in Fontana
We stock and install Famco and Copperfield caps, DuraFlex stainless liner systems, and HeatShield resurfacing materials on our Fontana jobs. When you get a quote from us, the brand name is on the line item, not hidden behind “quality parts.” We keep common Fontana flue sizes in local inventory, so most repairs don’t wait on shipping. See our brands for the full list we work with.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Fontana, CA
| Service | Typical range in Fontana |
|---|---|
| Chimney sweep (standard) | $180 – $340 |
| Chimney sweep (heavy creosote, rotary) | $340 – $600 |
| Dryer vent cleaning | $120 – $275 |
| Chimney cap installation | $300 – $700 |
| Chimney cap replacement | $350 – $750 |
| Chimney flashing repair | $600 – $1,600 |
| Chimney crown repair | $450 – $1,200 |
| Chimney liner installation | $1,200 – $4,000 |
| HeatShield resurfacing | $900 – $2,500 |
| Camera inspection (standalone or with sweep) | $99 – $249 |
Two things push Fontana prices up: roof pitch on the older two-story tracts and glazed creosote that demands rotary sweeping rather than a standard brush run. Whatever the line item, you’ll get a flat price before we start, and nothing gets recommended without camera evidence you can see.
Neighborhoods We Serve in Fontana
We work across all four Fontana ZIP codes: 92335, 92336, 92337, and 92331. Most of our calls come from the older tracts, where original fireplaces and dryer vents haven’t been touched in decades.
- Southridge
- Downtown Fontana (near Sierra and Arrow)
- North Fontana (92336)
- West End (92337)
- Summit Heights area
For most Fontana neighborhoods we can schedule within a few days, and camera inspections are available as a standalone appointment if you want documentation before committing to repair work.
Service Area – Cities Near Fontana
Our crews cover Fontana and the surrounding Inland Empire communities. We schedule regularly in Bloomington, CA, Rialto, CA, Glen Avon, CA, and Pedley, CA, so if you’re just over the city line, the same crew and the same flat-price process apply.
Serving Fontana, CA — Our Local Coverage Area
We’re based in the Fontana area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Fontana
Most Fontana appointments are scheduled within a few days, depending on the season. Fall and early winter fill up fastest because people start burning right after the first cold snap. A camera inspection takes about an hour start to finish. Call (833) 467-6493 to check the current schedule for your ZIP code.
For most liner installations, cap replacements, and flashing repairs, no permit is required because the work happens inside the existing chimney structure. If the repair involves rebuilding masonry above the roofline, Fontana may require a permit. We’ll flag it during the quote if your job needs one.
We see this constantly in Fontana’s older tracts. If the original furnace or water heater still vents into that sealed chimney, the flue needs a camera inspection before anything else. We’ll open the cleanout, run the camera, and tell you whether the chimney is safe to leave alone or needs relining. Call (833) 467-6493 for a free estimate.
If your chimney hasn’t been looked at in years, or you’ve been told it needs a liner and want to see the proof, call (833) 467-6493. We’ll put a camera in the flue, show you what’s there, and quote only the work that actually needs doing.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fontana Customers Say
"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
— Tara Barrett"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
— Luis Ramirez"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
— Erin Doyle