Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Westminster, CA
Chimney repair in Westminster usually means fixing rusted metal flues, damaged caps, and neglected factory-built fireplaces in 1960s-1980s tract homes. Most chimneys here are manufactured metal systems rather than traditional masonry, so the work is about sealing against winter rain, clearing Santa Ana wind debris, and restoring components that sat untouched for years. Glendale Chimney Sweep has served Westminster since 2011, and we stock the replacement parts these homes actually need. Call (833) 467-6493 for a free estimate.
Why Westminster Homes Are Different
Westminster’s housing stock runs heavily to single-story and two-story stucco tract homes built between the 1960s and 1980s, most on slab foundations. The fireplaces in these houses are almost always factory-built metal units, not field-constructed masonry. That distinction matters more than most homeowners realize. A masonry chimney can absorb decades of weather exposure; a metal flue from 1974 is thinner, more prone to rust-through, and far less forgiving of deferred maintenance.
The climate adds another layer. Westminster sits close enough to the coast that winters bring real rain, and when a cap is missing or a chase cover has rusted out, that water goes straight down the flue and into the firebox. We see the results every winter: rust streaks on the interior, damp smell around the fireplace in January, and gypsum board staining on the ceiling nearby. Santa Ana winds in the fall push leaves, twigs, and nesting material into uncapped flues across the 92683 and 92684 ZIP codes. None of this produces heavy creosote, because most fireplaces in Westminster see little actual burning. Instead, the work here is inspection, leak sealing, component replacement, and bird or rodent nest removal from systems that have been dormant for years.
Styles & brands we work with





Our Main Westminster Services
Westminster homeowners call us most often for two things: sweeping chimneys that have sat unused for years, and clearing dryer vents that have never been touched since the house was built. Both are about venting safety in older tract homes.
Chimney Sweep in Westminster
A sweep in Westminster is less about heavy creosote and more about what has moved into the flue while nobody was looking. We pull sparrow nests, rodent debris, and rust scale out of metal chimneys. We check that dampers open and close, that the flue is intact, and that gas-converted fireplaces are venting correctly. Many calls here come from homeowners preparing to sell, or from families who just bought a house and want the fireplace checked before first use. The full service breakdown, including local pricing and what to expect, is on our Chimney Sweep in Westminster page.

Dryer Vent Cleaning in Westminster
Westminster laundry rooms are often interior closets with long, convoluted vent runs to the exterior wall. Lint builds up in those runs over decades. The risk is real: a restricted dryer vent forces the dryer to overheat, and lint is combustible. We run professional rotary brushes through the full vent run, verify exterior airflow, and document before-and-after conditions. For detail on local pricing and how this job works in Westminster’s tract homes, see our Dryer Vent Cleaning in Westminster page.

What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Westminster

Chimney repair in Westminster generally means restoring a metal factory-built chimney system that has been losing the fight against rain and coastal air. We regularly replace rusted chase covers, reseal leaking flashing at the roof line, and install new caps on flues that have been open to the elements for decades. When the flue itself has cracks or rust-through, we offer HeatShield resurfacing and DuraFlex liner systems, which let us repair without tearing out walls. One call covers the fireplace, chimney, and dryer vent, and our work is backed by material-specific warranties from the manufacturers we stock. Learn more about our full repair scope on our Chimney Repair hub page.
Chimney Cap Installation
Signs you need it
Birds nesting inside the flue, water staining around the fireplace after rain, or visible rust on an old cap that is no longer sealing mean it is time for a new chimney cap.
What it costs in Westminster
A new chimney cap installed in Westminster typically runs between $325 and $565, depending on the flue size and whether the old cap needs removal and disposal.
How we do it
We measure the flue, select a stainless or copper cap sized to Westminster’s standard metal flues, secure it, and verify the spark arrestor mesh is seated so birds stay out.
Chimney Cap Replacement
Signs you need it
An old cap that has rusted through, shifted out of position, or lost its mesh means water and wildlife have a direct path into the chimney.
What it costs in Westminster
Replacing an existing cap in Westminster is typically $295 to $465 when the prior cap is removed, the flue opening is checked, and a new cap is fitted.
How we do it
We remove the failed cap, inspect the flue opening for hidden damage, clean the mounting area, and install a properly sized replacement with fresh fasteners.
Chimney Flashing Repair
Signs you need it
Water in the attic after rain, peeling paint near the chimney, or ceiling stains in the room below all point to flashing that has pulled away or corroded.
What it costs in Westminster
Flashing repair on Westminster homes is commonly $425 to $775 depending on how much of the existing flashing can be salvaged versus replaced.
How we do it
We identify the failed seam, remove the affected flashing section, and install fresh flashing sealed against winter rain with the proper grade of sealant.
What Chimney Repair Costs in Westminster
| Item | Typical range in Westminster |
|---|---|
| Chimney cap installation | $325 – $565 |
| Chimney cap replacement | $295 – $465 |
| Chimney flashing repair | $425 – $775 |
Two things push repair prices up in Westminster. First is access: steeper roof pitches on two-story tract homes require more setup time and safety equipment. Second is hidden damage: once we open a chase cover or pull a cap, we sometimes find rust that extends further down than anyone could see from the outside. You will always know the price before we start the work, because we quote flat prices before booking, not estimates that can shift after the fact.
How long does a chimney cap replacement take in Westminster?
Most cap replacements in Westminster take 60 to 90 minutes on site, including removing the old cap, inspecting the flue opening, and installing the new one. Roof access conditions can add time. Call (833) 467-6493 for an exact quote.
Will a new chimney cap stop the leak in my Westminster fireplace?
If the water is entering through the flue opening, a properly fitted cap will stop most intrusion. If the leak is at the flashing or chase cover, the cap alone will not fix it. We diagnose the entry point before recommending anything, so you never pay for a cap that will not solve the problem.
Brands We Service in Westminster
We work with a curated roster of professional chimney-industry brands, including Famco, Copperfield, DuraFlex, and HeatShield. These are the names professional chimney contractors rely on, and we stock their parts locally so Westminster repairs do not stall waiting on shipments. Our brands page details each manufacturer and where we use them.
Pricing for Chimney Company in Westminster, CA
| Service | Typical range in Westminster |
|---|---|
| Chimney cap installation | $325 – $565 |
| Chimney cap replacement | $295 – $465 |
| Chimney flashing repair | $425 – $775 |
| Chimney crown repair | $475 – $850 |
| Chimney liner installation | $2,600 – $5,200 |
| Chimney sweep (standard) | $199 – $329 |
| Dryer vent cleaning | $135 – $245 |
| Chimney inspection | $149 – $279 |
What pushes a Westminster job toward the higher end of any range is almost always condition: a chimney that has been open to rain for years costs more to put right than one that was capped and maintained. You get a flat price before we book the appointment, and nothing gets added on unless we find a problem you specifically approve us to fix after seeing the camera evidence yourself.
See the difference
Before
After
Before
After
Before
AfterNeighborhoods We Serve in Westminster
We work throughout Westminster, including the tract home corridors around Westminster Boulevard, Brookhurst Street, and Bolsa Avenue. Most of our repair calls come from older neighborhoods where homes were built in the 1960s and 1970s and the chimneys are reaching the end of their original service life.
- Westminster Boulevard corridor
- Brookhurst Street tract homes
- Bolsa Avenue neighborhoods
- 92683 ZIP code area
- 92684 ZIP code area
Response time across Westminster is typically within a few business days for non-emergency work, and we batch appointments by neighborhood when possible to keep travel overhead low.
Service Area – Cities Near Westminster
Glendale Chimney Sweep serves Westminster and the surrounding Orange County cities. We are also active in Midway City, CA, Garden Grove, CA, Stanton, CA, and Huntington Beach, CA. If you are in one of these areas and need chimney repair, sweeping, or dryer vent cleaning, the same flat-price policy applies.
Serving Westminster, CA — Our Local Coverage Area
We’re based in the Westminster area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Westminster
Most component-level repairs, like cap replacement, flashing repair, and crown work, do not require a city permit in Westminster. Full chimney rebuilds or structural changes may trigger a permit review. We will tell you during the estimate if your job is one that needs city approval, and we handle the paperwork when it does.
Most Westminster appointments are scheduled within three to five business days. We batch jobs by neighborhood to keep drive time down, so if we are already working near Brookhurst or Bolsa Avenue, we can often fit you in sooner. Call (833) 467-6493 and we will give you the earliest available slot for your ZIP code.
Some Westminster HOAs require approval before exterior chimney components are modified, especially if the change is visible from the street. A cap replacement in a standard material rarely draws attention, but if your HOA requires a review, we can provide specification details and material information for your application.
Call Glendale Chimney Sweep in Westminster
If your Westminster chimney has been sitting neglected through years of rain and Santa Ana winds, call us. We will inspect it, show you exactly what we find with camera documentation, and give you a flat price for the repair before any work begins. Glendale Chimney Sweep has served Westminster since 2011, and we stand behind the brands we install. Call (833) 467-6493 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Westminster Customers Say
"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
— Rafael Guzman"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
— Carlos Morales"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
— Tim Parker